1.Technical parameters of 795 standard coating spraying machine:
Power kw 3.0 FM motor air compressor power kw 0.36kg
Flow L / min 0-20
Horizontal conveying capacity (m) 60
Vertical conveying capacity (m) 30
Speed rpm stepless speed regulation bucket volume 70kg
Weight kg 85
L × W × H 800 × 400 × 1100
Features of 795 Standard Edition Coating Sprayer:
1. Suitable for spraying materials: water-soluble materials such as putty powder, paint, latex paint, real stone paint, cement mortar, dry powder mortar, thermal insulation mortar, waterproof material, fireproof material, heat insulation material, and sound-absorbing material.
2. Adjust the flow rate to get the desired spray effect.
3. In addition to being able to switch on the electric control box, it is also equipped with remote control switch spraying.
4. The connection between the spray gun and the feeding tube can be rotated for easy operation.
5. High construction efficiency and good quality.
6, small size, convenient for on-site handling, and low parts costs, simple maintenance.
7, easy to use, fast speed, save materials, save labor, more money, a machine is only equipped with three people, 150 square / hour (thickness 2cm).
8. Material ratio (cement) 0.7: 3 Mortar III. 795 Standard edition coating spraying machine applicable material range Detailed introduction:
1. Putty: 5-10 meters conveying distance, you can spray the inner and outer wall putty, 60 cm large trowel to flatten, three people to operate 1500 square meters a day, reduce the overall cost by half.
2, real stone paint: distance 10-20 meters, ds-3 type is a small machine, can only be used in spider plant, plus a special stone paint spray gun, two people operate 1500-2000 square meters a day, saving 1500 yuan per day 3, texture Paint; conveying distance 5-30 meters, two people operate 2000-3000 square meters a day, saving 2,000 yuan per day 4. Water-saturated paint: conveying distance 5-30 meters, two people operate 2000-3000 square meters a day, saving 2000 The price is RMB 5, thin-layer fireproof and waterproof coating; the transportation distance can reach 5-40 meters, and it can be sprayed with 2000-3000 square meters for 2 people per day, saving labor costs.
Fourth, 795 standard edition spray coating machine operation guide;
1. Before starting each shift, press the manual oil pump several times to fill the transmission part with oil.
2. After turning on the power, first power the main motor and check whether the rubber screw rotation direction is consistent. If not, change the power phase wire (this check must be performed every time the power is reconnected)
3. Connect the delivery hose and spray head, add 5L of clean water to the hopper, start the motor to pump the clean water, and moisten the hopper, pump body and conveying hose to stop most of the water after pumping out 4. Add putty to the hopper Or paint can start spraying (the air compressor should be started first and the air valve should be opened)
5. It is strictly forbidden to run without material and water in the hopper.
6. After the work, drain the remaining material in the hopper, fill the hopper with enough water, clean the hopper, start the pump, and clean the hoses and nozzles until the pump is full of clean water to prevent the remaining material from being in the hose. Freezes and clogs hoses and nozzles.
V. Attention of construction personnel:
1. Hydropower should be available at the construction site, so that it is convenient to work,
2. The construction site should try to select those safe and level grounds.
3. At the construction site, we should bring gloves, masks, goggles and hard hats to prevent accidents.
4. When the spraying machine is working, the workers' hands cannot be put into the hopper barrel.
5. It is also important to avoid stacking machinery and circuits in open places.
Address: No. 7, Daqiao Road, Licheng District, Jinan City, Zero International Logistics Port, Hardware Zone