I. Parameters of multifunctional real stone paint spraying machine:
Can be customized according to the different needs of customers.
Exhaust air volume 12,000 cubic meters ｜ h
Make-up wind volume 13,000 cubic meters ｜ h
Installed power 8kw
Pressure ratio 1: 1
Compressed air pressure 0.5-8 bar
The amount of paint 38L ｜ min
Continuous operation flow 21L ｜ min
Displacement 290L ｜ min
Working width: 1,300MM, weight about 1 ton
Construction steps of multifunctional real stone paint spraying machine:
The construction steps of the multifunctional real stone paint spraying machine seem simple, but they still test the craftsmanship and quality of the construction party. Bright paint reminds you that you need to pay special attention when doing real stone paint for exterior walls:
1. Before the real stone paint is officially sprayed, test spray on the test panel in advance, and adjust it according to the spraying state. After confirming that the hue and spraying format are all correct, enter the formal spraying.
2. According to the spraying construction requirements, the viscosity can be adjusted with clear water, and the price of water-based real stone paint should be increased from less to more.
3. The joint part is prone to color unevenness. It is recommended to contact the construction to avoid obvious marks on the joint.
4. To reduce chromatic aberration, it is recommended to order a sufficient amount of materials at one time, and wholesale water-based true stone paint, and increase the reserve of true stone paint by 1-3 ‰.
The third line of the real stone paint coating system: the topcoat and topcoat serve as the protective layer of the coating. How much is the water-based real stone paint? Second, weather resistance, protective coating to extend the service life of the product, three moisture-proof and mildew-proof, to protect the decorative effect; four, light and color, prevent fading / discoloration.
Topcoat quality issues can cause:
1) The coating is dirty and difficult to clean 2) Short life 3) Moldy finish 4) Fading / discoloration
3. Maintenance of multifunctional real stone paint spraying machine:
It is roughly divided into before construction, during construction, and after construction.
1. Inspection and maintenance of multi-function real stone paint spraying machine before construction:
1) Motor equipment: Including the inspection of the motor, power supply and transmission lines, and electrical control box, all switches should be in the off state.
2) Lubricating oil: Check whether the oil in the compressor and main engine gear box is sufficient.
3) Check the hopper for debris and slag.
4) Whether the spraying hoses, nozzles and air ducts are unobstructed.
2. Routine inspection during construction of multifunctional real stone paint spraying machine 1) Jog the motor to check the rotation direction (main motor clockwise, air compressor counterclockwise);
2) Whether the air compressor, wind pressure, air volume, and air gun are normal, and the pressure is normal between 0.4 and 0.6.
3) Check the indication of the instrument, especially whether the voltage meets the design requirements (380v), and check the diameter and distance of the power line and the connection of the connector.
4) The air flow setting of the air pressure switch is caused by the looseness of the air pressure switch parts during transportation. The pressure spring should be readjusted.
3. Multi-functional real stone paint spraying machine inspection and maintenance after construction 1) Electrical equipment check all instruments, buttons, air pressure switches, ball brakes, motor temperature is normal 2) Spray hoses, nozzles and air pipes, check all Sealed and secured. The air pipe and shotcrete pipe must not show signs of knotting or breakage.
3) Air system: check joint seal, fixation and wind pressure, air volume and working conditions.
4) All bolts, nuts, and screws must be checked frequently for looseness, and tightened in time if found loose (especially the bolts of the electrical control box)
Fourth, the scope of application:
This machine is mainly designed for the characteristics of the spray paint industry, and can also be equipped with drying equipment. The reciprocating spray gun is used to move and spray uniformly. According to customer requirements, 4-12 spray guns can be installed, which can be used in one machine for spraying primer, color paint and top paint. The spray gun switch can be controlled automatically. The workpieces of different widths and lengths can be adjusted.
Address: No. 7, Daqiao Road, Licheng District, Jinan City, Zero International Logistics Port, Hardware Zone 7-321