一定牛彩票

Real stone paint spraying machine construction technical requirements

Updated: 19/10/17 15:13:10 Source: debortina.comClose
    Nowadays, the number of people using real stone paint spraying machines is increasing, and the effect of spraying is better and satisfactory when they are used. Now the real stone paint spraying machine has become an indispensable equipment. Many projects will use the real stone paint spraying machine Construction reduces construction time. There are also many precautions in the construction of real stone paint spraying machines. The following editors introduce the technical requirements for the construction of real stone paint spraying machines.
    1. Primer When spraying the primer, use the spray gun of the special real stone paint spraying machine, the air pressure of the air compressor must be above 4kgl, the center of gravity of the spray gun is perpendicular to the wall, and sprayed evenly back and forth twice from a distance of 750px-1250px. Before painting, first remove the waste on the wall with a shovel. After painting, there is a layer of oil.
    2. Shiqi real stone paint spraying machine uses a special spray gun, the air compressor pressure must reach 7kg or more, the muzzle is vertical to the wall, the distance is 1250px-2000px, the first pass can be sprayed to 80% before the second pass, the first pass Cover the wall evenly once, spray it evenly according to the floating point of the sample for the second time, and tear off the adhesive tape after spraying. After the spraying is completed, the floating point should be uniform, the color and luster should be consistent, no foaming, no falling off, and the thickness should reach 2mm or About 3mm.
    3. Grinding Before spraying the waterproof protective film, you need to use tools such as C sandpaper to grind away the sharp angles of the floating sand and grit on the surface of the dried coating to increase the beauty of the natural real stone paint surface, and at the same time ensure the complete coverage of the protection.
    4. The topcoat stone paint layer is completely dry (it is usually dry for 72 hours on sunny days) before spraying the topcoat. The spray gun of the real stone paint spraying machine is the same as the spray gun of the primer. The air pressure of the air compressor requires more than 4kg. The muzzle is perpendicular to the wall, with a distance of 750px-1250px, sprayed back and forth evenly. The topcoat is generally sprayed twice. After the stone paint is oiled, it needs to be shiny, but it cannot be shiny.
    The above are the technical requirements for the construction of real stone paint spraying machine. I hope it can help everyone.
    Editor: zrm
    Shandong Zexin Painting Equipment Co., Ltd. Tel: 189-5454-2478

    Address: No. 7, Daqiao Road, Licheng District, Jinan City, Zero International Logistics Port, Hardware Zone

    a