一定牛彩票

Putty powder spraying machine without pressure solution

Updated: 19/09/16 16:12:09 Source: debortina.comClose
    The putty powder spraying machine has saved time during construction, and its spraying efficiency is high, which is welcomed by people. However, sometimes when the putty powder spraying machine is used, there is no pressure on the equipment, and the construction time will be affected. So how to solve the putty powder spraying machine without pressure? The following editors will introduce it to everyone.
    1. Check the steel balls of the pump body, and check whether the large steel balls and small steel balls have been washed out. If there are grooves or pits, the steel balls will go up when they suck, and then they will not be sealed. Yan, the air entered the machine and there was no pressure.
    2. Check whether the sealing ring of the pump body, including the white leather ring and O-ring, is worn out. If the sealing of the pump body is not tight, this will also lead to no pressure on the machine.
    3. Check the alloy inside the pump body. If there is any problem, if the alloy seat is worn, it will cause the machine to have no pressure. 4. Check whether the pressure regulating valve of the machine is open. Keep the machine from spraying.
    5. See if the suction port is blocked. If there are debris or particles in it, the machine will not be able to suction and there is no pressure.
    The above is the solution to the pressure of the putty powder spraying machine. Of course, there may be other factors that will cause the pressure of the putty powder spraying machine.
    Editor: zrm
    Shandong Zexin Painting Equipment Co., Ltd. Tel: 189-5454-2478

    Address: No. 7, Daqiao Road, Licheng District, Jinan City, Zero International Logistics Port, Hardware Zone

    a